The SMALLRIG Universal Phone Holder Mount review centers on a compact clamp for creators who want to put a smartphone on a camera or tripod and add a light or microphone nearby.
Its adjustable joints and broad stated phone-width range make it a flexible option for video, interviews, and livestream setups.
SMALLRIG Phone Mount Review Summary
The quick verdict

2,000+ ratings
Read Amazon ReviewsSMALLRIG Universal Phone Holder Mount 4382
A practical choice for creators who want to mount a range of smartphones on a camera or tripod and switch between portrait and landscape framing.
- The clamp supports smartphones 57–88 mm (about 2.5–3.5 inches) wide.
- A 1/4-inch-20 threaded hole and cold shoe at the bottom provide mounting options for a camera or tripod.
- The phone can switch between landscape and portrait orientation and lock when rotated 90 degrees.
- Two rotary joints each support up to 180 degrees of adjustment.
Pros
- Fits phones across a useful 57–88 mm width range.
- Supports both portrait and landscape framing, with two adjustable joints for positioning.
Consider before buying
- The stated 500 g maximum load calls for care when combining the phone holder with accessories.
- The package includes one phone holder, so a camera or tripod and any microphone, light, or power-bank holder must be supplied separately.
Read the full review summary
The 4382 combines a phone clamp, two 180-degree rotary joints, a bottom 1/4-inch-20 threaded hole, and a cold shoe on top.
That gives a creator several ways to position the phone and mount the holder, while keeping a shoe-style accessory close to the phone.
Its listed 500-gram load capacity is a useful setup constraint to keep in mind when adding gear.
It is best suited to people who want one holder for different phones or who regularly change between portrait and landscape composition.
Check that your phone falls within the 57–88 mm width range, then consider how you will mount it and which accessories you intend to use.
The package includes the holder only, so a compatible camera or tripod and any add-on gear are separate parts of the setup.
The buying factors
SMALLRIG Phone Mount Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Phone-width range
The 57–88 mm clamp range covers many phone sizes, though buyers should check their device width.
Mounting flexibility
A bottom 1/4-inch-20 thread and cold shoe provide two mounting approaches.
Orientation changes
The holder is designed to switch between landscape and portrait and lock after a 90-degree rotation.
Angle adjustment
Two rotary joints, each supporting 180-degree adjustment, allow flexible positioning.
Accessory expansion
The top cold shoe and spaced threaded holes support a more equipped rig, subject to the 500 g load capacity.
Carry-friendly size
At 73 g and roughly 4.06 by 1.63 by 1.23 inches, it adds little bulk to a camera bag.
Key Features and Specifications of SMALLRIG Phone Mount
- The clamp supports smartphones 57–88 mm (about 2.5–3.5 inches) wide.
- A 1/4-inch-20 threaded hole and cold shoe at the bottom provide mounting options for a camera or tripod.
- The phone can switch between landscape and portrait orientation and lock when rotated 90 degrees.
- Two rotary joints each support up to 180 degrees of adjustment.
- A cold shoe on top is designed for accessories such as a microphone or light; spaced threaded holes are intended for compatible power-bank holders.
- The holder weighs 73 g, measures approximately 4.06 × 1.63 × 1.23 inches, and has a listed maximum load capacity of 500 g.
Pros and Cons of SMALLRIG Phone Mount
Pros
- Fits phones across a useful 57–88 mm width range.
- Supports both portrait and landscape framing, with two adjustable joints for positioning.
- Offers threaded and cold-shoe mounting options.
- Lightweight and compact for a camera or travel kit.
Consider before buying
- The stated 500 g maximum load calls for care when combining the phone holder with accessories.
- The package includes one phone holder, so a camera or tripod and any microphone, light, or power-bank holder must be supplied separately.
- Phone fit depends on width, so check your device with its case attached if you plan to keep the case on.
Who Should Buy SMALLRIG Phone Mount?
Good fit
Consider the SMALLRIG 4382 if you film with a phone and want to attach it to a camera or tripod using a standard threaded mount or a cold shoe.
Its ability to change between portrait and landscape is useful when your framing needs vary between clips, social posts, interviews, and livestreams.
The two rotary joints add positioning options, while the top shoe and spaced threaded holes can help build a more organized rig.
Before buying, measure the phone at its widest point in the configuration you will use, including its case if applicable. Also account for the holder's 500 g maximum load when deciding what to mount alongside the phone.
Who should skip it
Look elsewhere if you need a holder for a phone outside the 57–88 mm width range or need a setup whose combined load exceeds 500 g.
This model is also a poor fit if you expect a complete filming kit in the box: the listed package contains the phone holder alone.
How the SMALLRIG Phone Mount Fits a Creator Rig
Mounting it to cameras and tripods
The bottom 1/4-inch-20 threaded hole and cold shoe make the holder adaptable to common camera-rig and tripod arrangements. Think through your existing support before choosing between them; the mount itself does not replace a tripod or camera support.
Framing in two orientations
Being able to switch between portrait and landscape helps when a single phone serves different recording formats.
The holder is designed to lock when rotated by 90 degrees, and its two rotary joints can each adjust through 180 degrees, giving you ways to refine the phone's angle after choosing an orientation.
Adding accessories thoughtfully
The top cold shoe is intended for a microphone or light, and the spaced threaded holes are designed to facilitate compatible power-bank holders.
These expansion points can simplify a compact rig, but the 500 g maximum load means it is sensible to consider the combined setup rather than assume every accessory combination is appropriate.
Checking fit before purchase
The clamp's 57–88 mm width range is the key compatibility check.
If you record with a case, measure the phone with that case in place; a nominal phone model match does not establish the width of every case-and-phone combination.
Alternatives to SMALLRIG Phone Mount
Cell Phone Camera Mounts alternative

700+ ratings
Read Amazon ReviewsSMALLRIG Magnetic Metal Phone Mount with Cold Shoe Mount 5156
Choose the 4382 if you prefer a clamp that accommodates phones by width, including a wider range of models.
The 5156 may suit a MagSafe-compatible iPhone owner who prefers magnetic attachment and wants its detachable plate design; its compatibility is centered on that phone feature, so confirm your device qualifies before choosing it.
- The 5156 is designed for iPhones with MagSafe functionality and uses a magnetic mounting approach.
- It also has dual rotating shafts, a bottom threaded hole and cold shoe, and a detachable top plate that can serve as a mounting plate for accessories.
- The 4382 uses a width-adjustable clamp for phones from 57 to 88 mm and includes two rotary joints for positioning.
Is SMALLRIG Phone Mount Worth It?
The SMALLRIG Universal Phone Holder Mount 4382 is worth considering for phone-based filming when you want flexible mounting, portrait and landscape changes, and adjustable positioning in a compact holder.
Its 57–88 mm clamp range makes it a versatile starting point for creators using different phones.
Check your phone's width and plan around the 500 g maximum load before adding accessories.
If those constraints suit your setup and you already have the camera or tripod support, the 4382 offers a practical way to integrate a phone into a creator rig.
Your review at a glance

2,000+ ratings
Read Amazon ReviewsSMALLRIG Universal Phone Holder Mount 4382
A practical choice for creators who want to mount a range of smartphones on a camera or tripod and switch between portrait and landscape framing.
- The clamp supports smartphones 57–88 mm (about 2.5–3.5 inches) wide.
- A 1/4-inch-20 threaded hole and cold shoe at the bottom provide mounting options for a camera or tripod.
- The phone can switch between landscape and portrait orientation and lock when rotated 90 degrees.
- Two rotary joints each support up to 180 degrees of adjustment.