Product Reviews

SmallRig Cold Shoe Mount 2060 Review

A practical two-mount kit for camera-cage users who need to add a microphone, flash, or LED through threaded mounting points.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

The SmallRig Cold Shoe Mount review focuses on a straightforward way to add shoe-mounted accessories to a camera cage, handle, or plate with compatible threaded holes.

The two-mount kit suits builders who want fixed accessory positions and already know which mounting points their rig supports.

SmallRig Cold Shoe Review Summary

The quick verdict

SmallRig Cold Shoe Mount 2060
4.7/5

3,000+ ratings

Read Amazon Reviews

SmallRig Cold Shoe Mount 2060

A practical two-mount kit for camera-cage users who need to add a microphone, flash, or LED through threaded mounting points.

  • Two cold shoe mounts are included in the package.
  • Each mount measures 25 × 25 mm (0.98 × 0.98 in).
  • The mounts are made from aluminum alloy.
  • A 1/4-20 screw attaches the mount to compatible threaded holes on a cage, plate, handle, or other accessory.

Pros

  • The two-mount pack can outfit separate positions or leave a spare for another setup.
  • Compact dimensions make it suitable for adding an accessory without a large mounting assembly.

Consider before buying

  • The fixed mount does not provide the tilt or repositioning described for ball-head style mounts.
  • Compatibility depends on the available thread and mounting layout; the M2.5 screws are unnecessary for most cage installations described, except the specified SmallRig Full Cage 1661.
Read the full review summary

Each aluminum mount measures 25 by 25 mm and provides a cold shoe for a microphone, flash, or LED accessory.

The package includes two mounts, two 1/4-20 screws, four M2.5 screws, and two hex spanners, giving you hardware for more than one rig position or a spare setup.

Its appeal is simple, compact mounting rather than angle adjustment. The mount uses a 1/4-20 attachment point, with M2.5 screws intended for compatible accessories; the mounting method depends on the cage or accessory being used.

Check the thread type and the manufacturer's compatibility note before buying, especially if you use a gimbal or the specified SmallRig Full Cage 1661.

The buying factors

SmallRig Cold Shoe Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

8/10

Accessory compatibility

Supports common 1/4-20 threaded mounting points and can hold a microphone, flash, or LED with a compatible shoe.

7/10

Mounting flexibility

The package offers two attachment methods through its 1/4-20 and M2.5 screws, subject to the mounting surface.

9/10

Rig footprint

At 25 by 25 mm per mount, it takes up little space on a cage, handle, or plate.

8/10

Kit completeness

Two mounts, screws for both listed thread types, and two hex spanners are included.

5/10

Positioning options

This is a fixed shoe mount; the supplied description does not describe an adjustable joint.

7/10

Compatibility clarity

The mounting points are clearly described, with specific caveats for DJI and ZHIYUN gimbals and one cage model.

Key Features and Specifications of SmallRig Cold Shoe

  • Two cold shoe mounts are included in the package.
  • Each mount measures 25 × 25 mm (0.98 × 0.98 in).
  • The mounts are made from aluminum alloy.
  • A 1/4-20 screw attaches the mount to compatible threaded holes on a cage, plate, handle, or other accessory.
  • Four M2.5 screws and two hex spanners are included for compatible mounting arrangements.
  • Two white arrows indicate the intended mounting direction, and bent bevels at one end are designed to help prevent accidental removal.

Pros and Cons of SmallRig Cold Shoe

Pros

  • The two-mount pack can outfit separate positions or leave a spare for another setup.
  • Compact dimensions make it suitable for adding an accessory without a large mounting assembly.
  • The included 1/4-20 and M2.5 hardware supports more than one threaded attachment arrangement.
  • The arrows and bent bevels offer clear visual cues for mounting direction and retention.

Consider before buying

  • The fixed mount does not provide the tilt or repositioning described for ball-head style mounts.
  • Compatibility depends on the available thread and mounting layout; the M2.5 screws are unnecessary for most cage installations described, except the specified SmallRig Full Cage 1661.
  • The product is specifically not suitable for DJI or ZHIYUN gimbals, so users of those systems should check for a different mounting solution.

Who Should Buy SmallRig Cold Shoe?

Good fit

Consider this kit if your camera cage, handle, or plate has compatible 1/4-20 holes and you want to add a microphone, flash, or LED through a cold shoe.

The 25 mm square footprint is a sensible fit when a compact, fixed attachment point is all you need.

The two included mounts are useful when you want to prepare two positions or keep a second mount available for another setup.

Before ordering, confirm the thread layout on your rig and check whether the accessory itself uses a compatible shoe.

Who should skip it

Look elsewhere if you need to change an accessory's angle after installation; this mount is presented as a fixed shoe rather than an adjustable head.

Do not choose it for a DJI or ZHIYUN gimbal, and verify the mounting instructions if you use SmallRig Full Cage 1661.

SmallRig Cold Shoe: Fit and Setup

Thread compatibility comes first

The mount's practical value depends on matching its attachment hardware to the threaded point on your rig.

Its 1/4-20 screw is the standard route described for cages, plates, handles, and other accessories; M2.5 screws are also supplied for compatible holes. Check both the thread and the available clearance before deciding where to place a mount.

A small fixed shoe for essential add-ons

A cold shoe gives compatible accessories such as microphones, flashes, and LED lights a mounting point on the rig. The 25 mm square size keeps the mount compact, but the supplied details do not describe an adjustable angle.

If your framing or light position changes often, consider whether a fixed attachment will suit that routine.

Two mounts, with mounting cues

The pair can serve separate locations or a primary setup plus a spare. White arrows show mounting direction, while the bent bevels at one end are designed to help prevent accidental removal.

These details may make orientation easier during installation, though the mount still needs to be secured using the appropriate included hardware.

Respect the stated rig exclusions

The manufacturer specifies that this mount is unsuitable for DJI and ZHIYUN gimbals. For camera cages, it describes using the 1/4-20 screw for most cages and notes a different screw consideration for SmallRig Full Cage 1661.

Confirm your specific rig against those notes before assembling a setup.

Alternatives to SmallRig Cold Shoe

Camera Flash Shoe Mounts alternative

SmallRig Double Ball Head Adapter 1135
4.6/5

1,000+ ratings

Read Amazon Reviews

SmallRig Double Ball Head Adapter 1135

Choose the 2060 when you want two compact, fixed mounting points. The 1135 is a better fit when angle adjustment matters and its single ball-head arrangement and stated load guidance suit your accessory.

  • The 1135 uses a double ball head that rotates through 180 degrees and locks with a side wingnut.
  • It includes a shoe base and a 1/4-inch screw, and is not recommended for monitors or LED lights over 1 kg.
  • The SmallRig Cold Shoe Mount 2060 is a compact fixed shoe mount supplied as a pair, with 1/4-20 and M2.5 screw options.

Camera Flash Shoe Mounts alternative

SmallRig Mini Ball Head Mount 3577
4.5/5

700+ ratings

Read Amazon Reviews

SmallRig Mini Ball Head Mount 3577

Pick the 2060 for a two-piece fixed-mount kit. Consider the 3577 if you need tilt adjustment for a light or microphone and the 250 g device limit matches your equipment.

  • The 3577 is a 20 g mini ball-head mount that tilts up to 138 degrees, uses a cold shoe adapter at the base, and has a 1/4-inch screw on top.
  • Its supported device limit is 250 g.
  • The SmallRig Cold Shoe Mount 2060 offers two fixed mounts and a 25 mm square footprint per mount.

Is SmallRig Cold Shoe Worth It?

The SmallRig Cold Shoe Mount 2060 is worth considering for a camera-rig builder who needs compact, fixed shoe mounts and has compatible threaded attachment points.

Two mounts and both 1/4-20 and M2.5 hardware make the kit practical for preparing more than one position.

Check your cage's thread layout and the stated gimbal exclusions before buying. If your setup requires adjustable accessory angles, a ball-head mount is a closer fit.

Your review at a glance

SmallRig Cold Shoe Mount 2060
4.7/5

3,000+ ratings

Read Amazon Reviews

SmallRig Cold Shoe Mount 2060

A practical two-mount kit for camera-cage users who need to add a microphone, flash, or LED through threaded mounting points.

  • Two cold shoe mounts are included in the package.
  • Each mount measures 25 × 25 mm (0.98 × 0.98 in).
  • The mounts are made from aluminum alloy.
  • A 1/4-20 screw attaches the mount to compatible threaded holes on a cage, plate, handle, or other accessory.

Written by

indieproducer.net Editorial Team

Editorial team

indieproducer.net publishes practical how-to guides and educational articles with clear steps and useful context.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

SmallRig Cold Shoe Mount 2060

SmallRig Cold Shoe Mount 2060

A practical two-mount kit for camera-cage users who need to add a microphone, flash, or LED through threaded mounting points.

  • Two cold shoe mounts are included in the package.
  • Each mount measures 25 × 25 mm (0.98 × 0.98 in).
Check Video Reviews on Amazon